GGS Smart Control System issues

[Mike]

Howdy folks! New here but figured I’d jusmp right in. I run multiple tents and lights from multiple manufacturers, but will focus on the spiderfarmer issue for this topic

 

i currently run a full Smart Control system

3×3 pro series tent

GGS smart controller

GGS AC10 power strip

4-in-1 pro sensor kit

4” exhaust / filter combo

6” oscillating fan

And an SE3000

 

I did do a firmware update and began having issues with all sensors going offline at the same time at random times of the day / night

 

when this happens all control is lost, controller goes blank as far as any readouts, the controller also goes offline in the app, I do still have access to the power strip but witht he controller in error status the light shuts off and all control is lost,  and Cannot be restarted until all rj12’s, power and ethernet is disconnected and reconnected,. Light cannot be taken out of linked status to manual or auto, or turned on through the app.

these issues began when the firmware update was done a few days ago, I have tried to reset the controller to factory settings but this does not reverse the firmware update

 

any assistance or ideas I’d be more than willing to try out.

 

• This topic was modified 4 weeks, 1 day ago by Mike.

Attachments:

You must be logged in to view attached files.

[Thomas Frank]

Slid sideways down a wet slope in Crazy Cattle 3D Ireland, took out three sheep like a bowling ball.

[LiamNoah]

GGS Smart Control System issues may include connectivity problems b9 game software glitches, inaccurate data readings, or delayed responses. These can affect system performance and user experience. Troubleshooting steps involve firmware updates, network checks, and hardware inspections. Prompt technical support is essential to ensure reliability, efficiency, and optimal system operation.

[Author]

Posts